XXZ3
Derived from the pluri-victorious XXF, the Mono XXZ, so far reserved only for our Official Teams, is confirmed as technologically at the top, presenting itself with a totally renewed design bringing with it many technical innovations, such as the 4 adjustments: compression and extension at low and high speeds, with new settings designed to give the rider the best feeling possible.
Inside it is renewed with technical solutions that optimize the smoothness of moving parts, improve the damping coefficient and increase the stability at high temperatures, without forgetting the use of light materials to lower the overall weight. The Ø 14mm rod increases smoothness while the piston of Ø 30mm reduces the masses of fluid in motion for a faster response to stress, particular attention was dedicated to maximize the sensitivity and accuracy of adjustments. XXZ is designed to reduce inertia and ensure an immediate control of suspension oscillations.
TARGET is to give the rider precise control and increase maximum grip, as well as even tyre wear which is provided by the immediate damping force. This gives confidence to the rider in the corners even at extreme lean angles, during fast direction changes and under hard acceleration. At the same time it provides excellent stability of the rear, even under the most extreme braking, regardless of the track or surface condition.
TECHNICAL FEATURES
Innovation is in the internals of the shock, with new technical solutions for improving the damping coefficient and increasing damping consistency at high temperature. The Ø14mm rod improves sliding, while the Ø30mm piston reduces the mass of the fluid in motion. These improvements have produced a reduction of inertial forces, and therefore an immediate control of the suspension oscillations. Particular attention is paid to increase ergonomics and precision of the adjusters, which are all positioned in the upper portion of the shock.
ADJUSTABLE IN:
- Low speed compression 24 clicks
- High speed compression 20 clicks
- Rebound 24 clicks
- Hydraulic spring preload 12 mm = 24 clicks
- Length 8mm
- High speed rebound 20 clicks
INCLUDED IN THE PACK: Specific mounting instructions and setting chart.
To see the available optionals CLICK HERE
Do you want to know if this product is available for your bike? CLICK HERE
If you would like to buy this product CLICK HERE
Mono shock Racing
