New aplication for Honda CBR 600
Bitubo is pleased to present the new applications for Honda CBR 600 RR with or without ABS from 2021
Pressurised EBH cartridge
The pressurised EBH cartridge contains a series of innovative systems such as the already known FPS, EC, LC and the new Overpressure Control System OPC (over pressure control)
On the top cap there are all the adjustments, spring preload, extension and compression which are distinct in the two cartridges, simple and intuitive.
The high damping coefficient at very low speed controls the excessive sinking of the front end from the very first moments of braking.
Code product: HO164EBH09
Also available in EBH00WO version
Mono shock Hydraulic Preload XXZ31
Derived from the pluri-victorious XXF, the Mono XXZ, so far reserved only for our Official Teams, is confirmed as technologically at the top, presenting itself with a totally renewed design bringing with it many technical innovations, such as the 4 adjustments: compression and extension at low and high speeds, with new settings designed to give the rider the best feeling possible.
ADJUSTABLE IN:
- Low speed compression 24 clicks
- High speed compression 20 clicks
- Rebound 24 clicks
- Hydraulic spring preload 12 mm = 24 clicks
- Length 8mm
- High speed rebound 20 clicks
Product code: HO130XXZ31
Rear monoshock CLU3
The “31” code identifies the red spring (for the most sportive models), while the “32” code specifies the black spring (for the most classic models).
The “31” code identifies the red spring (for the most sportive models), while the “32” code specifies the black spring (for the most classic models).
The spring adjustment is controlled by the hydraulic preload, which can be operated manually or with a 14mm hexagonal key.
ADJUSTABLE IN
- Low speed compression 24 clicks
- High speed compression 20 clicks
- Rebound 24 clicks
- Spring preload 12 mm = 24 clicks
- Length 8mm
Product code: HO144CLU31
KITT steering kit
Shock-absorbing steering kit with joints, ready for assembly, with transversal positioning above reservoir.
The joints are integral in Light Aerospace Alloy, and made from full with CNC machines.
Available with steering cushion in two colour versions: A1 - red and A2 -black
